GXM1 Series Plastic Case Circuit Breaker

I.UseGXMlseriesplasticcasecircuitbreaker(hereinafterreferredtoascircuitbreaker),ratedinsulationvoltage400V(shellratedcurrentratedbelow160A),690V(shellratedcurrent250Aandabove),mainlysuitableforAC50Hz.

Category:

Product consultation:

Product Description

I.Use

GXMl series plastic case circuit breaker (hereinafter referred to as circuit breaker), rated insulation voltage 400V (shell rated current rated below 160A), 690V (shell rated current 250A and above), mainly suitable for AC 50Hz. In the distribution network with rated current up to 800A and rated working voltage of 400V, it is used to distribute electric energy, protect the overload, short circuit and under voltage of the line and power equipment. A circuit breaker with a rated current of 400A or less is connected in series with a contactor between the circuit breaker and the motor to indirectly protect the motor from overload, undervoltage and short circuit. Under normal conditions, it can also be used as an infrequent conversion of the line.

This series of circuit breakers can be installed vertically. It can also be installed horizontally.

II.Model meaning

pircture

Note:

(1) The circuit breaker for power distribution has no code, and the protection motor is indicated by 2.

(2) The handle is operated directly without a code; Z—rotary handle operation; Z1—central, Z2—eccentric; D—motor operation.

(3) S—low breaking type, H—high breaking type.

The release type and accessory selection code are shown in the table below.

pircture

Two sets of auxiliary contacts and one alarm contact 268/368/468 are only for circuit breakers with Inm≥630A.

III.The main technical parameters are shown in the following table 2

pircture

IV.Shape and installation dimensions

pircture

Fig.1 Dimensions, installation dimensions and opening dimension of the front panel wiring breaker

pircture

Figure 2 Outline of the rear circuit breaker of the board, installation dimensions and hole size of the bottom plate

pircture

Figure 3 GXM1-400H drawout circuit breaker shape, installation and bottom plate opening dimensions

pircture

Figure 4 plug-in shape and bottom plate opening

pircture

Figure 5 GXM1-630H, 800H draw-out shape and installation floor opening diagram

The shape and installation dimensions are shown in Table 3 below.

pircture

Note: 

1. The "/" is followed by the H size.

2. Circuit breaker frame rated current Inm ≤ 250A is a plug-in structure; Inm ≥ 630A withdrawable structure; Inm = 400A has both plug-in and pull-out structures. GXM1-400H draw-out shape and installation floor opening view shown in Figure 3, plug-in shape and mounting plate opening size Figure 4 and Table

3. GXM1-630H, 800H draw-out shape and installation floor opening view shown in Figure 5.

keyword:

Circuit breaker | isolator | complete set of high and low voltage electrical equipment | low-voltage electrical components | LED lamp

Recommended Products

Welcome to leave a message

Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:0086-519-86261062